How To Do A Windows 7 Repair Using A Windows 7 Install Disc
How to create a boot disk
Updated: 12/31/2020 by Computer Hope
Note
This page provides details about creating a boot diskette, or floppy disk, for Windows and not how to create a bootable CD. If you're looking for steps for newer versions of Windows (eastward.yard., Windows seven, 8, or x), meet: How to create a recovery disk in Windows.
A kicking deejay allows you to boot from a diskette instead of your hard drive. This diskette tin fix issues that may ascend during the lifetime of your computer or help load older MS-DOS games. Keep in mind this diskette is completely dissimilar than a restore CD or disc that may have been included with your estimator.
Tip
After creating a kick diskette, it's highly recommended yous write-protect the diskette to forbid any virus from infecting the deejay or the disk getting erased.
Creating an MS-DOS boot disk
Notation
These steps are for users who have MS-DOS installed on the computer. Notice your version of Windows in the adjacent section and follow the steps.
To create an MS-DOS diskette, begin by getting to the DOS directory by typing:
cd\dos
One time at the C:\DOS directory, skip to copying files.
Creating a Windows 3.x boot disk
Note
These steps are for users who take Windows 3.x installed on the computer.
To create a Windows 3.x diskette, from Windows Program Managing director, click File and then choose the option to Exit Windows, which gets y'all to a prompt; at the prompt, blazon:
cd\dos
One time at the C:\DOS directory, skip to copying files.
Creating a Windows 95 kick deejay
Note
These steps are for users who have Windows 95 installed on the estimator.
In Windows 95, Microsoft has created a new method of creating a bootable recovery diskette. Unfortunately, notwithstanding, this diskette does non back up CD-ROM support and is missing a few recommended files. To practice this, click Start, Settings, Control Panel, double-click the Add/Remove program's icon, click the startup disk, and create the disk.
Alternatively, to create a Windows 95 kick diskette manually from Windows, click Beginning, Shutdown, and choose the option to restart the computer in an MS-DOS prompt. At the prompt, blazon:
cd\windows\command
Once at the C:\DOS directory, skip to copying files.
Creating a Windows 98 and ME boot disk
Note
These steps are for users who have Windows 98 or Windows ME installed on the computer.
An excellent feature of Windows 98 and ME is its kicking diskette. Using Windows to create a Windows 98 kick diskette gets all the needed boot files and CD-ROM support. To create a Windows 98 boot diskette, click Showtime, Settings, Control Console, double-click the Add together Remove program's icon, click the startup disk, and create the disk.
Alternatively, to create a Windows 98 boot diskette manually from Windows, click Get-go, Shutdown, and choose the option to restart the computer in an MS-DOS prompt. At the prompt, blazon:
cd\windows\control
Once at the C:\DOS directory, skip to copying files.
Copying additional files
Note
When making a kicking deejay, if you are running "Stacker" or some kind of a DoubleSpace or drive swapper program, this could not work.
In one case in DOS and at the correct directory (mentioned earlier), you're ready to create your bootable diskette. Insert a diskette that does not contain any information since it is going to be erased.
At the prompt, if you have MS-DOS 6.2, Windows three.ten, Windows 95, Windows 98, blazon:
FORMAT A:/Due south
If you have MS-DOS 5.0 Type using double density v.25" diskettes type:
FORMAT A: /360 /Southward
If y'all accept MS-DOS 3.11 through 4.0 using double density v.25" diskettes, type:
FORMAT A: /4 /Southward
Once the diskette is formatted and the system are transferred, yous'll be returned to your original directory. In this directory, type:
copy format*.* a: [press Enter]
copy fdisk*.* a: [press Enter]
copy mscdex*.* a: [press Enter]
copy sys*.* a: [press Enter]
re-create edit*.* a: [press Enter]
copy qbasic*.* a: [press Enter] (Win 95/98 users skip this line) copy debug*.* a: [printing Enter]
copy himem*.* a: [printing Enter]
re-create emm386*.* a: [press Enter]
If you're planning to use this diskette every bit a diskette to load games or y'all feel that y'all need mouse support, you need to re-create the mouse driver onto the kicking diskette. The MS-DOS mouse commuter is mouse.com or mouse.sys. Locate this file and copy information technology to your bootable diskette.
For CD-ROM back up, visit our CD-ROM drivers page for information on loading your CD-ROM driver.
Once you have copied the to a higher place files, create an autoexec.bat and a config.sys. Get to the floppy drive past typing A:, once at the floppy drive, type:
copy con autoexec.bat [printing Enter]
@echo off [press Enter]
LH A:\MSCDEX.EXE /D:CDROM [press Enter] (this line is used for your CD-ROM bulldoze).
LH A:\MOUSE.* [press Enter] (skip line if you lot did not copy mouse file, the * is either sys or com).
Press and hold Ctrl+Z to render ^Z. One time this is displayed, press Enter to copy the file.
copy con config.sys [press Enter]
device=a:\himem.sys
dos=high,umb
device=a:\emm386.exe noems
files=30
buffers=20
devicehigh=a:\oakcdrom.sys /d:CDROM (this line is used for your CD-ROM bulldoze).
Press and hold Ctrl+Z to return ^Z. One time this is displayed, press Enter to copy the file.
Congratulations, subsequently completing the above steps, you accept a bootable floppy diskette.
Creating a Windows NT boot disk
To create a kick diskette, y'all must have access to the i386 directory on your Windows NT CD or perhaps your difficult drive.
Format the floppy diskette you want to make a bootable Windows NT boot disk using the Windows NT auto.
Re-create kick.ini, ntdetect.com, and ntldr to the floppy diskette.
If you are using whatsoever SCSI devices that yous demand access to, you need to also load these drivers onto the diskette.
Creating a Windows 2000 boot disk
To create a Windows 2000 Professional bootable diskette, you need four one.44 MB diskettes and the Windows 2000 Professional person CD.
Click First, Run, scan to the CD-ROM drive.
Open the "BOOTDISK" folder and double-click makeboot.exe and click ok to launch the program to create the diskette.
Users can besides create an Emergency Repair Disk by clicking Offset, Programs, Accessories, Organisation Tools, and opening backup. From the backup window, click the button for Emergency Repair Deejay and follow each of the steps.
Creating a Windows XP kicking deejay
Note
The Microsoft Windows XP CD is a bootable CD and doesn't demand a bootable floppy diskette. Booting from the Windows XP CD allows you to not only install or reinstall Windows XP, but too troubleshoot.
Create MS-DOS bootable diskette
When formatting a floppy diskette, users have the pick of creating an MS-DOS startup deejay, follow the steps below to do this.
- Place diskette in the calculator.
- Open My Computer, right-click the A: drive and click Format.
- In the Format window, check Create an MS-DOS startup disk.
- Click Start.
Create Windows XP setup diskettes
Microsoft has phased out bootable floppy diskettes in favor of bootable CDs and has not included a method of creating a bootable floppy diskette in Windows XP or from the CD.
How to use a kick disk
Once the bootable diskette is successfully created, follow the steps below to apply the boot disk.
- Identify the diskette into write-protect mode (in case a virus is on the reckoner, this prevents the virus from transfer itself onto the diskette).
- Insert the diskette into the computer and reset or plow on the estimator to begin the boot process.
- As the reckoner is booting, respond the questions prompted (if any).
- Once at the A:\> prompt, have the advisable deportment depending on the situation of the computer.
Troubleshooting
- How to create a bootable Windows USB drive.
- How to make a bootable CD.
- How to create a Windows ERD or ASR.
- How do I become a boot diskette?
- Can an NTFS partition be accessed using a bootable diskette?
- Why am I unable to restore my computer using restore disc?
- What files are needed to boot a computer?
- How to fix the error 'missing command interpreter'.
- Floppy drive help and support.
- CD-ROM help and support.
- USB help and support.
Source: https://www.computerhope.com/boot.htm
Posted by: bryantpaped1958.blogspot.com
0 Response to "How To Do A Windows 7 Repair Using A Windows 7 Install Disc"
Post a Comment